Home > General, linux > Linux Routing – Making the Process Easier!

Linux Routing – Making the Process Easier!

The routing table is an easy file on computer that allow or aware particular user to how to locate other computers. Generally, it explains the process a packet requires to go to find another computer on the network. This sort of facility was never available in the previous models of the computer system. However, the entire modern or advanced computer designers design their individual routing table that stands on statement between devices like the computer and routers. At the same way, the routing table can offers the computer that device like wireless card and network card for definite list of IP addresses. In this regard, the Linux routing system is the right option for the user because it is easy to access for the Linux user with comparison to Windows and Macs users. So, the Linux routing process is become much popular than other system users because easy accessibility of Linux routing or operating system.

Other hosts and destination IPs fall in the third range. And any IP that is not on machine itself or else locally reachable (that is connected to same media segment) is just reachable through the IP routing device. The routing device should have the IP address in locally reachable address range. All the IP networking is permutation of three fundamental concepts of the reachability. In case, you would like to deal with one or more host in network, then you would like to define the route to entire network. It is handy in case, you have the multiple gateways routing for different parts of same network. For example, in case, was been located behind the gateway in, whereas rest of network you require was been located behind, and you may define gateway of for destination as well as have blanket route in defined in Route To Networks section.






Categories: General, linux Tags: ,
  1. No comments yet.
  1. No trackbacks yet.